Tagged: COBB AccessPORT Toggle Comment Threads | Keyboard Shortcuts

  • cobbaccessport 11:48 PM on April 11, 2009 Permalink | Reply
    Tags: 2009 Mazdaspeed3, , , COBB AccessPORT, Handheld, , , , , V1.03 Maps   

    COBB AccessPORT for 2009 Mazdaspeed3 

    COBB Tuning announces the immediate availability of the AccessPORT for the 2009 Mazdaspeed3. The AccessPORT is the first hand-held device available for the 2009 Mazdaspeed3 that performs an ECU reflash through the vehicle’s OBDII port. Just plug it in, load the new V1.03 maps and go! Faster!

    The AccessPORT provides owners of 2009 Mazdaspeed3 vehicles the ability to unlock power hidden within the factory ECU. Performance gains across the entire powerband can be quickly realized in the short time it takes to flash the vehicle’s ECU with the AccessPORT. No tools are required. No additional “piggy-back” hardware. No mailing the factory ECU across the country. No vehicle downtime. No waiting. Just plug the AccessPORT in, flash the ECU and enjoy the thrill of increased torque and horsepower!

    Flashing the ECU for increased performance is just the start of what the AccessPORT is capable of. Set the AccessPORT to Performance mode to capture 0-60MPH times, ¼ Mile times and Trap Speeds. Switch over to Live Data and choose a gauge to monitor, such as; air/fuel ratio, intake air temperature, throttle position, spark advance, wastegate duty, MAF voltage, boost and many more. Turn on the new Datalogging feature and capture data across mutiple channels while you drive for detailed analysis of your engine’s performance. Use the Troubleshooting mode to diagnose issues by reading the factory codes and resetting the system once the issues have been resolved.

    The AccessPORT can be used to eliminate separation anxiety for those times you are away from your car. Protect your investment when out on the town by quickly loading the Valet map to prevent the engine from revving above 3,200 rpm. Load the Anti-Theft map when you park to make it impossible to start. And in the event the car must be returned to the stock configuration, the AccessPORT can be completely removed and the ECU restored to its factory condition.

    The AccessPORT from COBB Tuning is the most comprehensive hand-held ECU flashing, monitoring and managing device available for the 2009 Mazdaspeed3. Satisfy your hunger for more power. Access the Potential of your Mazdaspeed3 today!

    2009 Mazdaspeed3

    2009 Mazdaspeed3

    2009 Mazdaspeed3 AccessPORT Features:
    • Increase horsepower and torque with the touch of a button
    • Easy installation requiring no tools or computer skills
    • Display vehicle performance with 0-60MPH and 1/4 Mile clocks and Trap Speeds
    • Monitor vehicle data such as MAF voltage, coolant temp, throttle position and much more
    • Troubleshoot by viewing trouble codes and resetting multiple electronic control systems
    • Valet and Anti-Theft modes help prevent abuse and theft
    • Built in Datalogging capability for multiple data channel recording
    • Completely and easily

    Advertisements
     
  • cobbaccessport 1:33 AM on April 4, 2009 Permalink | Reply
    Tags: , , AP-MAZ-001, , , , COBB AccessPORT, , , , , , , , , , , , , , , Mazda RX8 ECU, , , , , , ,   

    Cobb AccessPORT for Mazda RX8 

    Cobb tuning, Inc has brought AccessPORT for Mazda RX8.

    The Part number of the AccessPORT is AP-MAZ-001.The AccessPORT is the most user friendly reprogramming device for your vehicle’s computer. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel!

    Supported Applications:

    • 2004- 2009 Mazda RX 8 (6MT only)

    Mazdaspeed6 AccessPORT features are as follows:

    »  Improve horsepower, torque, and fuel economy at the touch of a button

    »  Display vehicle data such as RPM, temperatures and more while you drive

    »  Easy installation, no need to uninstall your ECU, no mechanical or computer skills necessary (built in recovery mode fail safe)

    »  Connects to your vehicle via the OBD-II port conveniently located under your dash

    »  Pre-calibrated to maximize performance of stock or modified vehicles

    »  Easy-to-read color display

    »  Update over the Internet to stay up-to-date with the latest features

    »  Read engine trouble codes (DTC) yourself, eliminating trips to the dealership

    »  Not a “piggyback” – once vehicle’s computer has been programmed by the AccessPORT, it can be removed and the settings will stay on your computer.

    »  Not just an “ECU reflash” – AccessPORT features enhancements such as data monitors, reading DTCs, performance monitors and more

    »  Coming Soon: The ability to be custom tailored to your vehicle through  our extensive network of professional tuners.

    AccessPORT Stage 1 Dyno Graph

    AccessPORT Stage 1 Dyno Graph

    AccessPORT Package includes:

    • AccessPORT
    • Quick Start User Guide
    • USB Cable
    • OBDII Connector
    • Software CD

    Price: $695.00   Buy Now

    Important

    This package will only work with North American Mazda RX-8’s.

     
  • cobbaccessport 1:15 AM on April 4, 2009 Permalink | Reply
    Tags: , , , , , , COBB AccessPORT, , , , , , , , , , , , , , Mazdaspeed 3, Mazdaspeed3 ECU, , , North American Mazdaspeed3, , , , ,   

    AccessPORT For Mazda Speed3 

    Cobb tuning, Inc has developed AccessPORT for Mazdaspeed 3.

    The Part number of the AccessPORT is AP-MAZ-002. The most user friendly reprogramming device for the complex Mazdaspeed3 ECU. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel! Controlling aspects such as boost and throttle position, throughout each gear selection, ensures that you have maximum power and drive ability for enhanced daily driving!

    Supported Applications:

    • 2007- 2009 Mazdaspeed 3

    Application Details:


    Mazdaspeed 3

    Mazdaspeed 3

    Mazdaspeed6 AccessPORT features are as follows:

    »  Improve horsepower, torque, and fuel economy at the touch of a button

    »  Display vehicle data such as RPM, temperatures and more while you drive

    »  Easy installation, no need to uninstall your ECU, no mechanical or computer skills necessary (built in recovery mode fail safe)

    »  Connects to your vehicle via the OBD-II port conveniently located under your dash

    »  Pre-calibrated to maximize performance of stock or modified vehicles

    »  Easy-to-read color display

    »  Update over the Internet to stay up-to-date with the latest features

    »  Read engine trouble codes (DTC) yourself, eliminating trips to the dealership

    »  Not a “piggyback” – once vehicle’s computer has been programmed by the AccessPORT, it can be removed and the settings will stay on your computer.

    »  Not just an “ECU reflash” – AccessPORT features enhancements such as data monitors, reading DTCs, performance monitors and more

    »  Coming Soon: The ability to be custom tailored to your vehicle through  our extensive network of professional tuners.

    AccessPORT Package includes:

    • AccessPORT
    • Quick Start User Guide
    • USB Cable
    • OBDII Connector
    • Software CD

    Price: $695.00   Buy Now

    Important

    This package will only work with North American MazdaSpeed3’s.

     
  • cobbaccessport 12:30 AM on April 4, 2009 Permalink | Reply
    Tags: , , , , , , COBB AccessPORT, , , , , , , , , , , , , , Mazdaspeed 6, Mazdaspeed6 ECU, , , , , , ,   

    AccessPORT for Mazdaspeed 6 

    Cobb tuning, Inc has developed AccessPORT for Mazdaspeed 6.

    The Part number of the AccessPORT is AP-MAZ-002. The most user friendly reprogramming device for the complex Mazdaspeed6 ECU. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel! Controlling aspects such as boost and throttle position, throughout each gear selection, ensures that you have maximum power and drive ability for enhanced daily driving!

    Supported Applications:

    • 2006 – 2007 Mazda Speed6

    Application Details:

    Mazdaspeed 6

    Mazdaspeed 6

    Mazdaspeed6 AccessPORT features are as follows:

    »  Improve horsepower, torque, and fuel economy at the touch of a button

    »  Display vehicle data such as RPM, temperatures and more while you drive

    »  Easy installation, no need to uninstall your ECU, no mechanical or computer skills necessary (built in recovery mode fail safe)

    »  Connects to your vehicle via the OBD-II port conveniently located under your dash

    »  Pre-calibrated to maximize performance of stock or modified vehicles

    »  Easy-to-read color display

    »  Update over the Internet to stay up-to-date with the latest features

    »  Read engine trouble codes (DTC) yourself, eliminating trips to the dealership

    »  Not a “piggyback” – once vehicle’s computer has been programmed by the AccessPORT, it can be removed and the settings will stay on your computer.

    »  Not just an “ECU reflash” – AccessPORT features enhancements such as data monitors, reading DTCs, performance monitors and more

    »  Coming Soon: The ability to be custom tailored to your vehicle through  our extensive network of professional tuners.

    Dyno Graph for Mazdaspeed 6

    Dyno Graph for Mazdaspeed 6

    AccessPORT Package includes:

    • AccessPORT
    • Quick Start User Guide
    • USB Cable
    • OBDII Connector
    • Software CD

    Price: $695.00   Buy Now

    Important

    This package will only work with North American MazdaSpeed6’s.

     
  • cobbaccessport 1:24 AM on April 1, 2009 Permalink | Reply
    Tags: , , COBB AccessPORT, Damage, Direct Sunlight, heat shock, Improper Storage, Operating Temperature, Relative humidity, Repair, Risk, Static electricity, Storage temperature, Temperature, Vibration, Wet   

    If U take care, it will take care of U. 

    Operating and Storage Temperatures

    The AccessPORT is designed to be operated at temperatures between 32° and 95° F (0° and 35° C) and with a relative humidity below 90%. Using the AccessPORT outside of these recommendations may result in damage.
    When storing the AccessPORT, do so in a place where temperature is always between 0° and 115° F (-20° and 45° C) and with a relative humidity below 90%. Never store your AccessPORT in an area that receives direct sunlight.

    Do Not Get Wet

    Take care to prevent any liquids from coming in contact with the AccessPORT or any associated equipment. In the event your AccessPORT, or associated equipment, gets wet you may need to send it in for service. Please contact technical support BEFORE attempting to use the AccessPORT.
    Handling and Storage

    You AccessPORT may be damaged by improper storage or handling. Be careful not to drop your AccessPORT or any associated parts. Never store your AccessPORT in an area that experiences any noticeable levels of vibration, static electricity, heat shock, or excessive swings in relative humidity.

    Do Not Attempt Repairs Yourself

    Never attempt to open your AccessPORT or any associated equipment. Doing so puts the components at risk of damage from, but not limited to, static shock. No user-serviceable parts are inside. At no time will ANY authorized representative of COBB Tuning, Inc. ask you to open or mechanically/electronically alter the AccessPORT.

    Opening the AccessPORT will void any and all warranties for the device and its operation.

     
  • cobbaccessport 2:39 AM on March 26, 2009 Permalink | Reply
    Tags: , AccessPORT Getting Start, AccessPORT Software, , , Before installation, , , COBB AccessPORT, connect AccessPORT, Connect-Ap, ECU reprogramming process, , , Installation, , OBD connector, , , Pre-installation, process, , test mode, Test-mode-connectors, USB,   

    COBB AccessPORT Installation (Reference Subaru) 

    Pre-Installation

    The AccessPORT comes with the most up-to-date software and map files available at the time of shipment. However, it is possible that updated software and/or map files have been made available since the time of shipment. Therefore, the recommended procedure is to connect the AccessPORT to the AP Manager software and download the latest software and map files for the target vehicle.

    Getting Started

    1. Insert the key into the vehicle’s ignition and leave it in the OFF position.

    2. Locate the Test Mode connectors. Impreza and Forester models will have this located under the driver’s side dash to the left of the steering column. The Legacy and Outback models will have this located on the passenger side. With the connectors located, enable Test Mode by plugging the two
    connectors into each other.

    3. Connect the small end of the provided USB cable to the mini-USB port on the back of the OBD connector.

    4. Plug the OBD connector into the vehicle’s OBD-II port.

    5. Plug the large end of the USB cable into the standard USB port on the underside of your AccessPORT. At this point the AccessPORT will power up and present the installation menu after approximately 20-30 seconds

    6. Select [Install] from the AccessPORT menu by pressing the [OK] button to proceed with installation. Below is a diagram of the AccessPORT’s keypad function.

    Port Signs

    IMPORTANT!

    Before installing the AccessPORT on the vehicle, it is important to verify that the vehicle is adequately prepared for the installation process. Since the AccessPORT uses the vehicle’s battery for power and the ECU reprogramming process requires adequate battery power as well, it is critical to verify that the vehicle’s battery has a good charge. This can be done through the use of a battery charger/conditioner or by driving the vehicle for a period of time prior to installation to allow the alternator to recharge the battery. Furthermore, please ensure that all in-car electronic devices are turned off to reduce power draw on the battery. This includes car stereos, video screens, GPS units, radar detectors, interior and exterior vehicle lights, and any other electronic device that uses the car battery for power.

     
  • cobbaccessport 12:25 AM on March 25, 2009 Permalink | Reply
    Tags: , , COBB AccessPORT, , , , , , , More-aggressive-settings, power, , ,   

    What is Map? 

    Map stands for “More Aggressive settings“, provides large gains in torque and horsepower while maintaining a high degree of safety.

    The AccessPORT reprograms the tuning parameters inside the factory Engine Control Unit (ECU) using map files, which contain specially written instructions for the AccessPORT to follow during the reprogramming process. A map file can contain information for any number of different modifications or enhancements to a vehicle, ranging from a race map for a heavily modified vehicle to an economy map for a stock vehicle. Through the use of the AccessPORT and different map files the ECU can be reprogrammed to accommodate virtually any vehicle configuration.

    COBB Tuning provides several preloaded maps for common power modifications. These maps are known as Base Maps. Each base map is dyno developed and rigorously tested in multiple COBB Tuning facilities across the country these tests cover the spectrum of altitude, temperature, humidity, octane and fuel quality variables to ensure proper calibration and performance wherever the car is driven.

    Map ChangeSince all base maps and custom tune maps are stored in the AccessPORT, you can change maps any time you want. Switch to a race gas map for that extra performance at the track. Go to the Fuel Economy map for those long boring drives. Load the Valet map to keep revs below 3,200 when you drop your car off with the parking attendant. The Anti-Theft map does not allow the car to start, keeping it safe in suspect areas or during extended parking.

     
  • cobbaccessport 11:58 PM on March 23, 2009 Permalink | Reply
    Tags: , , , COBB AccessPORT, , EvoX, , GT, Gt-R, , Infinity, , , , , , My-car, Nissan, , , STI, , Support, WRX   

    Is Ur Car in the list? 

    COBB GT

    Does COBB AccessPORT support my car? Why should not I make it sure from the list Below:

    Supported Subaru cars List

    • 2004 – 2007 Subaru Impreza STI
    • 2008 – 2009 Subaru Impreza STI
    • 2005 – 2009 Subaru Legacy GT (MT & AT)
    • 2005 – 2009 Subaru Outback XT (MT & AT)
    • 2004 – 2008 Subaru Forester XT (MT & AT)
    • 2009 Subaru Forester XT (MT & AT)
    • 2009 Subaru Forester XT (MT & AT)
    • 2008 – 2009 Subaru Impreza WRX (MT & AT)
    • 2002 – 2007 Subaru Impreza WRX (MT & AT)

    Supported Nissan cars List

    • Nissan 350z
    • Nissan GT-R (R35)

    Supported Mazda cars List

    • Mazda RX 8
    • Mazdaspeed 3
    • Mazdaspeed 6

    Supported Mitsubishi cars List

    • Evo (2003 – 2007)
    • Evo X (2008)

    Supported Infinity cars List

    • Infinity G 35
    • Infinity G 37
     
  • cobbaccessport 7:10 AM on March 19, 2009 Permalink | Reply
    Tags: , AccessTUNER_PRO, , COBB AccessPORT, , , feture, flash, , Laptop, , more_aggressive_setting, Motorpart, Motorparts, , on-board diagnostic, piggyback, Racing_cars, Speed, stockmap, , , ,   

    COBB AccessPORT 

    Cobb AccessPort

    Cobb AccessPort

    “Are you to busy to worry about tuning your own car? Would you like piece of mind knowing your vehicle’s computer (ECU) is protected against accidental damage. Are you ready to spend less time fumbling with a laptop and more time driving?”Cobb tuning, Inc introduced officially their new car tuning product COBB AccessPORT on August 19th 2008.

    The AccessPORT is ultimate personal tuning solution for your vehicle. Reprogram your vehicle’s computer (ECU) by selecting one of the pre-installed performance “more aggressive settings” (called maps) that automatically optimize settings such as the air/fuel ratio, ignition timing, boost and more for performance results you can instantly feel!

    Features:

    • Improve horsepower, torque, and fuel economy at the touch of a button.
    • Display vehicle data such as boost, RPM, temperatures and more while you drive.
    • Easy installation, no mechanical or computer skills necessary.
    • Connects to your vehicle via the OBD-II (on-board diagnostic port) port conveniently located under your dash.
    • Easy-to-read color display.
    • Update over the Internet to stay up-to-date with the latest features.
    • Not a “piggyback”. Once vehicle’s computer has been programmed by the AccessPORT, it can be removed and the settings will stay on your computer.
    • Not just an “ECU reflash” – AccessPORT features enhancements such as on-the-fly mode switching, data monitors, reading DTCs, performance monitors, boost cuts, boost reduction for speed and gears, fuel cuts, RPM limits, throttle body behavior, corrections, in addition to the normal functions like fueling, timing, and boost.
    • The AccessPORT downloads the actual map that was on it.  If you are taking your car to the dealership and suspect that they will attempt to update your mapping, then you will have to unmarry it, take it in and have them flash it, then remarry your AccessPORT.  This will allow your stock map loaded on your AccessPORT to be the latest factory revision.
    • Once the AccessPORT is married to the car only the AccessPORT can flash it.  To allow the dealer to flash your car as normal you will have to unmarry the AccessPORT from your car.
    • The ODB II (on-board diagnostic port) dataloging is not locked.  Any device that reads the OBD II data can still function properly.
    • Maps made by AccessTUNER Pro facilities can be shared, however the mapping can only be viewed by that AccessTUNER, not the end user nor another AccessTUNER.
    • Pre-calibrated to maximize performance of stock or modified vehicles.
    • Can be custom tailored to your vehicle by our extensive network of professional tuners

    Features Of COBB AccessPORT

    Features Of COBB AccessPORT

    So what are you waiting for – ‘Just plug the AccessPORT in, flash the ECU and enjoy the thrill of increased performance!”

     
    • Rocky 5:51 PM on March 25, 2009 Permalink | Reply

      I am thinking about buying a new AccessPORT Booster for my car 2006 Subaru Sti. Thanks For the topics.

c
Compose new post
j
Next post/Next comment
k
Previous post/Previous comment
r
Reply
e
Edit
o
Show/Hide comments
t
Go to top
l
Go to login
h
Show/Hide help
shift + esc
Cancel