Tagged: OBD-2 port Toggle Comment Threads | Keyboard Shortcuts

  • cobbaccessport 11:48 PM on April 11, 2009 Permalink | Reply
    Tags: 2009 Mazdaspeed3, , , , Handheld, , , OBD-2 port, , V1.03 Maps   

    COBB AccessPORT for 2009 Mazdaspeed3 

    COBB Tuning announces the immediate availability of the AccessPORT for the 2009 Mazdaspeed3. The AccessPORT is the first hand-held device available for the 2009 Mazdaspeed3 that performs an ECU reflash through the vehicle’s OBDII port. Just plug it in, load the new V1.03 maps and go! Faster!

    The AccessPORT provides owners of 2009 Mazdaspeed3 vehicles the ability to unlock power hidden within the factory ECU. Performance gains across the entire powerband can be quickly realized in the short time it takes to flash the vehicle’s ECU with the AccessPORT. No tools are required. No additional “piggy-back” hardware. No mailing the factory ECU across the country. No vehicle downtime. No waiting. Just plug the AccessPORT in, flash the ECU and enjoy the thrill of increased torque and horsepower!

    Flashing the ECU for increased performance is just the start of what the AccessPORT is capable of. Set the AccessPORT to Performance mode to capture 0-60MPH times, ¼ Mile times and Trap Speeds. Switch over to Live Data and choose a gauge to monitor, such as; air/fuel ratio, intake air temperature, throttle position, spark advance, wastegate duty, MAF voltage, boost and many more. Turn on the new Datalogging feature and capture data across mutiple channels while you drive for detailed analysis of your engine’s performance. Use the Troubleshooting mode to diagnose issues by reading the factory codes and resetting the system once the issues have been resolved.

    The AccessPORT can be used to eliminate separation anxiety for those times you are away from your car. Protect your investment when out on the town by quickly loading the Valet map to prevent the engine from revving above 3,200 rpm. Load the Anti-Theft map when you park to make it impossible to start. And in the event the car must be returned to the stock configuration, the AccessPORT can be completely removed and the ECU restored to its factory condition.

    The AccessPORT from COBB Tuning is the most comprehensive hand-held ECU flashing, monitoring and managing device available for the 2009 Mazdaspeed3. Satisfy your hunger for more power. Access the Potential of your Mazdaspeed3 today!

    2009 Mazdaspeed3

    2009 Mazdaspeed3

    2009 Mazdaspeed3 AccessPORT Features:
    • Increase horsepower and torque with the touch of a button
    • Easy installation requiring no tools or computer skills
    • Display vehicle performance with 0-60MPH and 1/4 Mile clocks and Trap Speeds
    • Monitor vehicle data such as MAF voltage, coolant temp, throttle position and much more
    • Troubleshoot by viewing trouble codes and resetting multiple electronic control systems
    • Valet and Anti-Theft modes help prevent abuse and theft
    • Built in Datalogging capability for multiple data channel recording
    • Completely and easily

    Advertisements
     
  • cobbaccessport 2:39 AM on March 26, 2009 Permalink | Reply
    Tags: , AccessPORT Getting Start, AccessPORT Software, , , Before installation, , , , connect AccessPORT, Connect-Ap, ECU reprogramming process, , , Installation, , OBD connector, OBD-2 port, , Pre-installation, process, , test mode, Test-mode-connectors, USB,   

    COBB AccessPORT Installation (Reference Subaru) 

    Pre-Installation

    The AccessPORT comes with the most up-to-date software and map files available at the time of shipment. However, it is possible that updated software and/or map files have been made available since the time of shipment. Therefore, the recommended procedure is to connect the AccessPORT to the AP Manager software and download the latest software and map files for the target vehicle.

    Getting Started

    1. Insert the key into the vehicle’s ignition and leave it in the OFF position.

    2. Locate the Test Mode connectors. Impreza and Forester models will have this located under the driver’s side dash to the left of the steering column. The Legacy and Outback models will have this located on the passenger side. With the connectors located, enable Test Mode by plugging the two
    connectors into each other.

    3. Connect the small end of the provided USB cable to the mini-USB port on the back of the OBD connector.

    4. Plug the OBD connector into the vehicle’s OBD-II port.

    5. Plug the large end of the USB cable into the standard USB port on the underside of your AccessPORT. At this point the AccessPORT will power up and present the installation menu after approximately 20-30 seconds

    6. Select [Install] from the AccessPORT menu by pressing the [OK] button to proceed with installation. Below is a diagram of the AccessPORT’s keypad function.

    Port Signs

    IMPORTANT!

    Before installing the AccessPORT on the vehicle, it is important to verify that the vehicle is adequately prepared for the installation process. Since the AccessPORT uses the vehicle’s battery for power and the ECU reprogramming process requires adequate battery power as well, it is critical to verify that the vehicle’s battery has a good charge. This can be done through the use of a battery charger/conditioner or by driving the vehicle for a period of time prior to installation to allow the alternator to recharge the battery. Furthermore, please ensure that all in-car electronic devices are turned off to reduce power draw on the battery. This includes car stereos, video screens, GPS units, radar detectors, interior and exterior vehicle lights, and any other electronic device that uses the car battery for power.

     
c
Compose new post
j
Next post/Next comment
k
Previous post/Previous comment
r
Reply
e
Edit
o
Show/Hide comments
t
Go to top
l
Go to login
h
Show/Hide help
shift + esc
Cancel